GOODALL INFRARED SERVICES
Aerial Infrared, Electrical Infrared Inspections, Environmental Infrared Surveys, Forest Fire Infrared Imaging, Heat Loss Surveys, Process & Quality Control Infrared Imaging, Paper Machine Surveys,
Oil Refinery Infrared Surveys, Roof Moisture Infrared Surveys, Stator Core Testing

Goodall Infrared Services is a consulting firm which has been in business for 27 years
conducting infrared scans for a variety of clients all over the United States.


Seattle in Infrared

What is infrared scanning? Infrared scanning, or thermography as it is also called,
 is a technique using thermal imaging radiometers.
Radiometers display an image of heat patterns radiating from surfaces and
are designed to produce temperature information.

Applications of Infrared Scanning done by Goodall Infrared Services

Printable Brochure

BOILERS -Heater Furnace
  • Survey electrical equipment for hot spots
  • Inspect burners for flame impingement and burner management
  • Look at combustion patterns of fuel
  • Detect thermal patterns on boiler tubes and measure tube skin temperature during normal operation or when boiler is on standby
  • Scan and record temperatures in areas of boiler not monitored
  • Scan the exterior of boiler for refectory damage or locate warmer areas where potential refectory damage may occur
  • Detect coke buildup in crude furnaces
  • Sample Report

 

BUILDING ENVELOPES
  • Locate missing or damaged insulation
  • Identify air leakage energy losses
  • Evaluate the thermal performance of retrofits
  • Provide hard-copy proof of problems
    Locate radient heating wires or pipes

 

radient.jpg (45528 bytes)

            

ELECTRICAL SYSTEMS
  • Detect problems quickly, without interrupting service
  • Asses priorities for corrective action
  • Minimize preventative maintenance and troubleshooting time
  • Virtually eliminate unscheduled power outages
  • Comply with insurance company requirements
  • Check for defective equipment while still under manufacturer warranty
  • Sample report
electric.JPG (10081 bytes)

 

 

ELECTRONIC EQUIPMENT

  • Thermal mapping of semiconductor devices
  • Circuit board component evaluation
  • Production-type inspection of bonded structures
  • Inspection of hybrid microcircuits
  • Inspection of solder joints

 

 

ENVIRONMENTAL CLEAN -UP

  • Locate old waste disposal sites on large tracts of lands through aerial surveys

  • Locate old buried tanks on industrial sites

  • Locate and monitor oil spills
enviro.jpg (17096 bytes)

 

PULP AND PAPER
  • Detect uneven heat distribution in fourdrinier stem boxes
  • Identify wet streaks, non-uniformity, that can have adverse effects on paper quality
  • Identify basis weight variations
  • Monitor size press performance
  • Analyze dryer temperatures to look for non-uniformity in dryers
  • Monitor coating to see that it is being applied uniformly to surface of the paper
  • Analyze reel to look for cross-machine and machine directional patterns that may be induced by different pieces of process equipment connected to the paper machine
  • Inspect chip piles for hot spots and profile thermal characteristics
  • Pulp and Paper Brochure


Paper Machine Reel

 

ROOFING
  • Identify water damaged portions of a roof quickly and accurately
  • Eliminate unnecessary replacement of good roofing
  • Plan accurate budgets based on facts
  • Document problems before the warranty/bond expires
roof.JPG (8486 bytes)

 

STEAM TURBINE-DRIVEN GENERATORS & HYDROELECTRIC GENERATORS
  • Locate interlaminar faults in stator cores
  • Monitor the effectiveness of repairs to the damaged areas
  • Help maintain quality control during a stator core repair
  • Obtain a "thermal fingerprint" of the stator core that can serve as a permanent record of the condition of the stator core following repairs

stator.JPG (9394 bytes)

 

Detect RF heating in antennas,  waveguides,
guywires and frame structures
couger.jpg (18447 bytes)

 

 
  • Other applications
  • Locate low-intensity sleeper fires on forest lands
  • Locate lost peoples
  • Remote sensing applications
  • Detect insulation leaks in refrigeration compartments
  • Detect delaminations in concrete bridge decks
image2.gif (23630 bytes)

Page 2
There are a wide variety of services that we can offer to our clients.
We would like to be of service to you.
 If you have any questions about applications and services, please call

Goodall Productions, Inc.

P.O Box 18677
Seattle, WA 98118
(206) 722-0544
1-888-848-1623
rgoodall@goodallinfrared.com
Roy R. Goodall-Thermographer

Images copyright by Roy Goodall @ 2007

Page last updated March 08, 2009
©2009 Goodall Productions, Inc. All Rights Reserved.